Lafayette House Paint: 5 Common Paint Problems & How to Fix Them
Over time, there are going to be problems that are going to naturally pop up as your paint gets exposed to all of these factors like moisture, heat, and intense weather changes. These problems could become bigger over time, especially when you are doing nothing about them. You could know more about interior house paint from Kind Home Solutions near Lafayette, CO to help address all of these problems sooner rather than later.
What are the Common Paint Problems in Lafayette House
1. Cracking, Flaking, and Clumping
As time passes, there may be some vein-like lines that may appear, that would just deepen, grow, and dry, which can be very frustrating to see. Your paint could start cracking, clumping, and flaking, and it could strike any surface, from your interior paint to exterior, and siding and wood to plaster.
What causes paint to crack?
The main cause of cracks in your paint would be insufficient surface prep for your walls, and applying your paint too thinly on your walls. Time, over-cleaning, moisture, sun exposure are some of the other factors that can contribute to this.
When you use a heavy hand while you are painting it could cause cracks of dry paint. This would make it look like there is a swollen look on your wall. This especially happens when you do not give your paint time to dry.
If you want to manage the damage, then you could start with removing all of the cracked and flaking paint on your walls. You could do this by using a scraper, chemical application, or a wire brush.
Once you are sure that you have removed everything, then it is time to sand the edges, clean it up, and then prime the surface. Repaint the spot that you cleaned, and then paint over it using a brush or a roller, depending on how big the damaged area is.
As for the paint peeling problem, you would be able to observe this in both the interior and exterior of your house. Peeling paint is very common and can only be completely repaired by prepping the surface and repainting it.
What causes paint to peel?
When it comes to peeling, moisture would have to be the number one cause of it. Other causes could also be because of improper prepping of the wall, and improper paint application.
If you are trying to fix your peeling problem, the best way is to scrape, prep and repaint the areas.
As for the exterior wall peeling, you are also going to have to prep the wall properly when you are planning on adding a fresh coat of paint to your wall. This means you are going to have to scrape, sand, clean, and prime the target spot before the paint brush even touches the wall.
3. Blistering a.k.a. Bubbling
Usually, there are going to be bubbles that would appear on your wall when the paint film that you have on fails to adhere, and then it could lift off of the surface. Both the interior and exterior of your home could have blisters.
What causes paint to blister or bubble?
The main cost of blistering on your walls would have to be moisture and heat. So when you paint the part of your house that is directly explored under direct sunlight or places that have overly hot surfaces, then you could expect your paint to blister.
As for the interiors, on the other hand, it’s the moisture that is causing it. The moisture could push the paint off the surface of your wall, especially in rooms like your basement, bathrooms, laundry room, and kitchens.
You could check the plumping, caulk, and ventilation when there are several coats of paint that are blistering. You could remove the blistering paint when you suspect that heat is the reason. Once you have removed it, sand it until it is smoothened out, clean the area, prime it, and then repaint.
You may have noticed that there are these crusty white salt crystals on your walls that may or may not be similar to pretzels. This usually happens on brick, cinderblock, mortar, and concrete because the salt is dissolved in the moisture and then it would stick on your walls.
What causes efflorescence?
There are a lot of possible causes for efflorescence, it may be because of groundwater penetration, insufficient curing time, you just painted over holes, cracks, and all of these different unrepaired pointings, moisture has migrated into your home, and there is insufficient surface prep when you removed the remove efflorescence.
If you want to repair this, then you have to do it when the weather is dry and warm. This would help with the waterproofing and helping in repairing the cracks, sealing the windows and doors, and repointing.
Last but not least, we have chalking. These are the fine, powdery white substance that you could usually see on the exterior part of your home that is usually seen in places where it is always sunny.
What causes paint to chalk?
Chalking is actually these pigments that are found in the paint that you may have used that would be released naturally due to all of the weather changes. This may have also been because you over-thinned the paint before you applied it, or because you used interior paint instead.
To help with this problem, you could wash the whole area using a power washer, or you could use a TSP solution before you start rinsing it. You need to let it dry before you repaint it again, this time making sure that you are using exterior paint that is of high quality.
There are a lot of problems that you may face, especially when you are doing no maintenance whatsoever. To help you with all of your home painting needs, you could talk to a professional.